How to Build a Reclaimed Wood Dining Table – If you have plenty of free time and also could give materials making your very own. Then this tutorial will be really suitable for you.

Reclaimed wood dining table is not difficult making. Materials that need can be easily obtained. On top of that you can customize the layout or design that suits the dining room.

One of the most prominent dining table shape for a dining room is rectangle.

This makes good sense due to the fact that most individuals like the visual of straight lines in a room that has straight lines.

Just what I indicate by that is to some individuals a curved table such as oval or round does not look as good in a rectangle or square area as a rectangle or square dining table.

The rectangle form fits much better in many dining-room forms compared to make even while accommodating more people.

Right here’s how to build a Reclaimed Wood Dining Table featuring a glass-capped tabletop filled with sand, sea glass as well as your favorite seashells.

This tutorial and picture, I took from diynetwork.com

How to Build a Reclaimed Wood Dining Table
How to Build a Reclaimed Wood Dining Table | diynetwork.com

How to Build a Reclaimed Wood Dining Table

TOOLS

  • Tape measure
  • Framing square
  • Table and circular saws
  • Level
  • 15 ga. and 18 ga. finish guns
  • Bit driver and bits
  • Pocket screw jig
  • Router
  • Hot glue gun
  • Orbital sander

MATERIALS

  • 1 piece 3/4″ plywood
  • 1 1/2″ 15 ga. finish nails
  • 1 1/2″ 18 ga. finish nails
  • 1 1/2″ & 3” pocket screws
  • Construction adhesive
  • 12′ reclaimed 4″ x 4″ post
  • 24′ reclaimed 2″ x 4″ stud
  • 12′ reclaimed 1″ x 12″ sheathing
  • 24 7/8″ x 60 7/8″ x 3/8″ tempered glass with sanded edges
  • 120- and 220-grit sanding discs

SAFETY GEAR

  • Safety glasses
  • Dust mask
  • Work gloves
  • Earplugs

INTRODUCTION

This humble yet classy dining room table combines wood, glass and natural elements. While using reclaimed wood in its natural state can honor its previous life, using too much can also appear overly utilitarian. Instead of a solid wood top, this table features an inset, under-lit glass top and coastal motif to bring additional life, color and texture to the project.

STEP 1

Fashion the Legs

Start by cutting four 28″ legs from a piece of 4″ x 4″ post. Next, cut a 3/4″ wide by 1 1/2″ deep notch 2″ from the top of each leg. Using a circular saw with the blade set to 1 1/2″, cut each side of the 3/4″ notch and then use additional cross cuts and a chisel to remove the remaining wood. Cut four 3″ x 3″ x 1″ triangular gussets from a spare piece of wood and, aligning the gusset with the bottom of the notch, attach one to each leg with construction adhesive and 15 ga. finish nails.

STEP 2

Build the Table Base

Cut a piece of 3/4″ plywood to 28″ x 64″ with 4″ x 45-degree facets in each corner. Temporarily set up the plywood and legs on a flat surface and check for square. Measure the distance between each leg; cut comparable 2″ x 3″ framing pieces out of 2″ x 4″ material. Route a 3/4″ x 3/4″ notch in the 2″ cut face of each framing piece and miter the corners at 45 degrees to fit perfectly to the angled legs.

STEP 3

Assemble the Table Base

Using construction adhesive and 15 ga. finish nails, attach the legs to the plywood and the 2” x 3” sides to both. Make sure everything is square and plumb and if necessary insert small wood shims prior to nailing. Finally screw the 2” x 3” to the legs at 45 degrees and the plywood to the gussets at 90 degrees.

STEP 4

Assemble the Top

The top is constructed from 1″ reclaimed sheathing joined in the corners. Start by cutting two 36″ x 6″ and two 72″ x 6″ pieces. Route a 1/2″ x 1/4″ notch on one side of each board and miter the corners back at 45 degrees to form a final 36″ x 72″ top. Through the bottom side of each board drill two pocket screw holes in one end and one hole in the other. Space the holes so that when the corners are joined the holes are offset. On a flat surface, screw the four corners together with pocket screws and wood glue.

STEP 5

(Optional): Install Under Lighting

Step up the cool factor by installing a low-voltage LED lighting system for the table. You will need:

• One 16′ reel of 12v 3200K LED strip lighting with self-stick back
• One LED dimmer
• One 12v 1a wall transformer

Prior to securing the wood top, install the LED strip along the upper edge of the table sides. Start in one corner and slowly peel off the backing while using firm pressure to adhere the LEDs to the wood. Continue around the perimeter. LED strips can be trimmed at any cut line. Look for a dashed line on the strip (usually after every third LED) and cut with a utility knife or scissors. Drill a 3/8″ hole in the plywood and pass the power connector through the hole. Hot-glue the remaining portion of the hole closed. Next, plug in the dimmer and attach it to the underside of the plywood with hot glue. Plug the wall transformer into the dimmer and continue with the next step.

STEP 6

Attach Top to Base

Lay a bead of construction adhesive on the top perimeter of the table base. Center the top on the base so the reveal is consistent on all sides. Shoot 15” ga. finish nails at a 45-degree angle through the table sides and into the top at 8” on center. With an orbital sander outfitted with a 220-grit disc, sand all surfaces lightly until smooth. If a more refined look is required, plane all the reclaimed materials prior to assembly.

STEP 7

Create Vignette

Fill the table with the motif of choice. Be sure to use only inert and non-toxic materials. In this case, local beach sand, shells and sea glass were selected to honor the history of the home and its location.

STEP 8

Cover the Top

Set the glass in place carefully, allowing it to rest on the notch in the top created earlier. Enjoy the pretty scene, which can be changed out with the seasons.

 

Dining Table Selection Tips for your Dining Room

Area: This is definitely vital. You should make certain that you have space for individuals to move in and out of their seat and get around the table. When gauging this, you should do so with the dining chairs set back from the table as they would certainly be with individuals sittinged in them. There’s nothing so bothersome for restaurants to have to removal their chair and press themselves against the table so people can get out behind their chair.

You’re much better off with a more slim and/or shorter table that comfortably accommodates individuals instead of every person being pressed.

Table Material: As you could see wood is the most popular, however you can also get glass table. I’m not a huge fan of glass, once in a while I see a glass design that makes me go “wow.”.

Opportunities are you’ll go with a strong wood dining table as well as if that’s your choice, you actually can not go wrong.

Leg Type: You could get pedestal base, trestle base or four individual legs. Our dining table has 2 pedestal legs and they look good, although the majority of modern tables have four unique legs.

Complete: This is an extremely difficult choice. If you go with timber, which is very likely, you need to pick a specific finish. Will it be dark, tool or light timber? How around a color such as grey? Distressed wood? White legs, light wood top (this is our kitchen area dining table which looks incredible and was done by my other half)?

Expansion: I believe eating tables with expansions are very convenient, whether they expand with a slide-out expansion or accordion extension in which you insert planks. They all include size as well as each has their disadvantages and also pros. Our dining room table has slide-out extensions which extends sitting capacity from 6 to 10. Our kitchen area dining table increases like an accordion in which we put a slab.

Should you acquire a set or independently?

If you’re in need of table and chairs, a collection can be a much better bargain as well as it assists with decision making. If you have great chairs, there is no factor to get a collection. Search for a table that suits the table.

Our table was bought individually from the chairs. My moms and dads gifted us the table and also chairs, both of which are antiques they had actually bought and also completed. This goes to reveal you that choosing comfortable dining area chairs is an actually smart suggestion.

Reclaimed wood dining table is not tough to make. When determining this, you should do so with the eating chairs set back from the table as they would certainly be with people seated in them. Our dining table has 2 stand legs as well as they look great, although many modern tables have four distinct legs. White legs, light wood top (this is our kitchen dining table which looks fantastic and also was done by my partner)?

 

Tags ; How to Build a Reclaimed Wood Dining Table, Dining Table, Reclaimed wood dining table, How to, Wood Dining Table